Aileron Stops
I made a pair of aileron stops out of delrin. I started with the 1.5" stock on the left, cut to 3/8" wide on the chop saw (middle), then drilled a hole in the center and turned down to about 3/4" on the drill press (right). They turned out nice!
This will be replace the stock aileron stop (1), and be installed on the push rod bolt (2), stopping against the hinge bracket (3).
Hey Larry! Man it was great to talk to you the other day! Looks like you are kicking some major butt on this plan! I'll keep coming back to see how things are progressing! Say hello to all the old timers at WB!!